【All Systems Diagnoses for Deep Inspection in Vehicles】
Autel MK808TS is a full system diagnostic scanner that can quickly test every system module’s status and make faster diagnosis & maintenance via reading/clearing codes as well as viewing live data etc., but only costs you a few minutes to finish full scanning. You can learn to perform complex diagnostic functions with that will give you a lot more power over the ins and outs of your car to figure out what is going on with your modern computerized vehicle, so that you can get it fixed and get back on the road in due time.
Brief introduction of its capabilities in full systems diagnoses as follows:
1. For Engine System: Diagnostic tool MK808TS can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
2. For Transmission: It makes great sense in the safety driving when your car is slipping or difficult to shift, this diagnostic tool can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.
3. For ABS System: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this diagnostic does for you.
4. For SRS System: SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic tool can detect every electronic parameter to check its health status
Widespread Coverage for Multiple Vehicle Models
It is compatible with most 1996 US-based vehicles or newer, and 2000 EU-based vehicles or newer.
In other words, it supports a wide range of modules that can be scanned for codes as well as the ability to display values and sensor data for the specific module scanned
Complete TPMS Functions for Boost in TPMS Work
Autel MK808TS, being available to activate 98% of all-known TPMS sensors, provides the most advanced TPMS diagnosis
and the most comprehensive OBD relearn coverage for a complete TPMS health check, allowing technicians to solve TPMS related problems with a series of quick and effective operations:
1. TPMS Check: The Check function allows users to activate TPMS sensors to view sensor data-sensor ID, tire pressure, tire temperature, battery condition and sensor location.
2. TPMS Diagnosis: The Diagnosis function is used to check the status of the TPMS system. This function requires connection with the test vehicle.
3.Sensor Programming: The Programming function allows users to program the sensor data to the MX-Sensor and replace faulty sensor with low battery life or the one that is not functioning. There are four options available when programming MX-Sensor:
1). Copy by Activation-Once the sensors mounted on the vehicle have been triggered and the sensor information displayed on the tool, the Copy by Activation can be used to program a new MX-Sensor.
2). Copy by OBD -By using this function, the tablet will program the sensor IDs retrieved from the ECU of the test vehicle to the new MX-Sensors.
3). Copy by Input-The Copy by Input allows users to program a new MX-Sensor with the ID of an original TPMS sensor.
4). Auto Create-The Auto Create function is used to automatically create a random sensor ID to program a new MX-Sensor.
5. TPMS Relearn: This function is used to write the newly programmed sensor IDs into the vehicle ECU for sensor recognition. There are three ways for Relearn: Stationary Relearn; Active Relearn; OBD Relearn.
6. TPMS by OEM Part No.: If the sensor’s OEM part number is known, this function is an efficient method to activate and program MX-Sensors.
Fully-Equipped Popular Functions Like a Repair Garage
As an advanced diagnostic tool, MK808TS has all kinds of services accessible for complete diagnoses and maintenance. You can quickly access to the vehicle systems within this function.
1). Oil Reset Service allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2). EPB service plays an important role in the maintenance of electronic braking system’s safety and efficiency.
3). BMS service allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4). DPF service specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5). SAS service helps clear the faulty steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6). IMMO is mainly used to disable the lost vehicle keys and program a new replacement key fob.
Advanced Hardware to Facilitate Your Repair Work
1. Except its widely-used software, the advanced hardware also brings glory to Autel MK808TS‘s smooth and fast operation.
2. Android 4.4.4-based tablet diagnostic tool greatly improves the working efficiency with performance and power optimized 1.5GHZ Cortex-A9 Processor.
3. 7 inch touchable LCD screen with 1024*600 resolutions offers ultra-clear visuals of the diagnostic data, making it easy to navigate and read codes.
4. 1GB RAM DDR3 / 32GB On-Board ROM Memory is not only an extended storage space but a way to reduce the possible issue of slow response.
5. Built-in 5000 mAh battery provides up to 7 hours continuous battery life for giving you a worry-free operation experience.
MaxiVCI Mini is equipped for connecting between the diagnostic tablet and DLC for wirelessly vehicle data transmission via the fast and reliable Bluetooth 2.1 EDR, allowing technicians to have complete freedom to move anywhere in the repair shop when the VCI is connected to the car.
Multilingual in Nature for Variety and Flexibility
This superior scanner MK808TS has the interface covering several universal languages including: English, Chinese Simplified, Chinese Traditional, Spanish, French, and German. By eliminating the language ambiguity, the mechanic needs no effort in trying to get translations in as far as the code meanings and repair formulas which are concerned, thus speeding up the diagnostic work.
Economizes the Cost and Adds Significant Gains
Autel MK808TS scan tool is suitable for any small-workshop owners and car enthusiasts who want to close the best possible deals with a reliable scanning device, which indeed is successful in giving the optimum performance and value for the investment.
If you are a mechanic shop owner, then this scanner is great for you as you will use it a lot.And it will earn its cost within a few months after buying.
If you are a car hobbyist, then this scanner would help you save much money having any issues known ahead of time, and be educated enough before hitting the dealer or mechanic.
More details, please check below
http://www.autelstore.co.uk/wholesale/autel-maxicom-mk808ts-tpms-relearn-tool.html
www.AutelStore.co.uk
Skype: AutelTool.co.uk
Email: sales@AutelStore.co.uk
Whatsapp: +86-13429866263 (Stacy)